Berkeley Twilight Walnut
|Pack Size||2.16 m²|
|Joining Method||Tongue & Groove|
|Installation Method||Floating, Nailed or Glued Down|
|Plank Style||Straight Plank|
Berkeley Twilight Walnut 150 x 14/3mm Wood Flooring is 14mm thick with a 3mm solid hardtop wear layer. This product comes in random lengths between 300-1800mm, meaning that you can create a natural vibe in your room by staggering the arrangement of certain planks thus avoiding any potential waste.
Walnut wood flooring is one of the most luxurious products on the market, it doesn't have the most modest price tag but once laid the true beauty and quality is evidential, completely transforming any room. This walnut product is elegantly pre finished with 7 coats of pearl satin UV lacquer giving it ultimate protection, durability and easy to maintain. Each plank has a 4v Groove, bevelled edge giving each plank more natural definition individually. This floor can be sanded down up to 4 times however it shouldn't be necessary to do so for the first 15-20 years.
The grade of this product is rustic meaning the planks have more knots and imperfections giving the floor a more natural approach. The rustic grade has seen a huge rise in popularity and is now the most sought after grade in the wood flooring industry.
This product can be installed using either the floating, nailed or glued down method. If you take a peek at our 'accessories' section above you will see that we also stock the engineered wood underlay that is required for some of the listed methods.
Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.
- 1. Floating Floor
- 2. Gluing
- 3. Nailing
In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.
With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.
With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.
Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.