Bibury Whisky Distressed Oak

Rating:
98% of 100
Special Price £133.43 was £310.60
Pack Price:

You require (m²)

All our samples are dispatched 1st class!

Room Suitability

  • Kitchen
  • Lounge
  • Dining
  • Bedroom
Product Code OD7001
Species Oak
Finish Oiled
Surface Distressed
Wear Layer 4mm
Width 220mm
Thickness 15mm
Length 2200mm
Grade Distressed
Pack Size 2.904 m²
Pack Weight 30.99kgs
Brand Bibury
Construction Multi Ply
Joining Method Tongue & Groove
Underfloor Heating Suitable
Product Origin Europe
Installation Method Floating, Nailed or Glued Down
Guarantee 25 Years
Plank Style Straight Plank

Bibury Whisky Distressed Oak 220 x 15/4mm is 15mm thick with a 4mm wear layer which comes in fixed lengths of 2200mm. This product has been given a truly amazing distressed look with large knots and blemishes, the oil is then applied to each plank before lightly brushing. The low shine finish makes for a low maintenance and highly durable floor.

Each plank has a bevelled edge providing more individual definition. This floor can be sanded down up to 5 times however it shouldn't be necessary to do so for the first 15-20 years, plus, with our 25 year guarantee you can rest assured that your floor will look stunning for years. The grade of this product is distressed meaning the planks have many knots and imperfections giving the floor much more natural character.

Engineered wood flooring is made from layers of plywood stuck together and finished with a layer of lamella for that authentic look. Because of the way in which it is constructed, engineered wood floor is therefore able to withstand fluctuations in temperatures, so can be used with underfloor heating. As well as this, it can also be used in rooms such as basements and conservatories where there are noticeable changes in temperatures. Additionally, engineered wood flooring is also water resistant, so is easy to maintain and clean.

The Bibury Whisky Distressed Oak can be installed using one of three techniques. Option one, ‘floating floor’, is achieved by gluing the tongue and groove parts of the board and allow the floor as a whole to float, usually cushioned with use of an underlay. Option two would be to secret nail the tongue part of the plank into a wooden subfloor. Finally, option three would be to stick the timber directly onto the subfloor with use of flooring adhesive. Please see the full, downloadable installation guide in the installation tab above for more information.

Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.

  1. 1. Floating Floor
  2. In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.

  3. 2. Gluing
  4. With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.

  5. 3. Nailing
  6. With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.

Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.