Brimham Walnut Acacia

97% of 100
Special Price £77.53 was £160.98
Pack Price:

You require (m²)

All our samples are dispatched 1st class!

Room Suitability

  • Kitchen
  • Lounge
  • Dining
  • Bedroom
Product Code SA1059
Species Acacia
Finish Lacquered
Surface Smooth
Joining Method Tongue & Groove
Width 122mm
Thickness 18mm
Length 300-1200mm
Grade Rustic
Brand Brimham
Pack Size 1.464 m²
Construction Solid Acacia
Installation Method Nailed or Glued Down
Underfloor Heating Not Suitable
Pack Weight 17kg
Guarantee 25 Years
Plank Style Straight Plank

Sure to bring style to any space, Luxury Flooring proudly presents our stunning Brimham Walnut Acacia 122 x 18mm. One of only two solid walnut lacquered acacia products available here at, this particular product has proven extremely popular.

Our Brimham Walnut Acacia 122 x 18mm has been elegantly pre finished with approximately 7 coats of lacquer; giving it ultimate protection and making it extremely easy to clean/maintain.

With a plank width of 122mm (12.2cm), this lacquered acacia product is considered fairly narrow as it falls under our 120-130mm width category. A plank width of 122mm would suit the vast majority of areas/rooms within your home; both narrow, small bedrooms to larger, more spacious areas.

The Brimham Walnut Acacia has a total thickness of 18mm (1.8cm). Given the fact that lacquered walnut acacia is already considered an exceptionally durable species, this thickness would be more than suitable for most commercial and residential properties. Should you ever feel the need to sand down and refinish this product, with a thickness of 18mm, you would be able repeat this process up to eight times. Please note; we don’t believe this will be necessary for the first 10-15 years but it is the end user’s preference.

This product comes in random lengths (RL) between 300-1200mm allowing whoever is fitting the floor to lay individual planks in a staggered, natural flowing formation. In addition to this, each board has a 4v groove, micro bevelled edge detail that gives each plank even more natural definition and individuality.

Our Solid Wood flooring can be installed in two different ways, so it depends on your subfloor and what sort of method you prefer.

  1. 1. Gluing
  2. With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue and groove parquet flooring.

    2. Nailing

    With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.

Check out our full guide for step-by-step instructions on how to fit solid wood flooring.