Elgin Coconut Engineered Oak
|Pack Size||1.805 m²|
|Joining Method||Tongue & Groove|
|Installation Method||Floating, Nailed or Glued Down|
|Plank Style||Straight Plank|
Elgin Coconut Oak 190 x 20/6mm has a thickness of 20mm with a 6mm solid hardtop wear layer. This product comes in fixed lengths of 1900mm and has a brushed and lacquered finish which gives the product an incredibly durable wear layer that also looks stunning.
This floor can be sanded down up to 5 times however it shouldn't be necessary to do so for the first 15-20 years, plus, this product comes with our 25 year guarantee meaning you can relax in the knowledge that your floor will maintain its gorgeous look for years. Each plank has a 4V Groove bevelled edge which gives each individual plank an incredible sense of definition and authenticity. The grade of this product is rustic, the most popular grade in the industry, which means the product will have some knots and imperfections which help in creating a stronger sense of character and warmth.
Engineered wood flooring looks incredible but it is also incredibly practical too. Engineered wood flooring is made from layers of plywood stuck together before being finished with a layer of lamella. This means engineered wood flooring can have many more applications in comparison to a solid wood for example. Engineered wood floor can therefore be used with underfloor heating and is also suitable for using in conservatories and even basements.
The Coconut Oak can be installed using one of three techniques. Option one, ‘floating floor’, is achieved by gluing the tongue and groove parts of the board and allow the floor as a whole to float, usually cushioned with use of an underlay. Option two would be to secret nail the tongue part of the plank into a wooden subfloor. Finally, option three would be to stick the timber directly onto the subfloor with use of flooring adhesive. Please see the full, downloadable installation guide in the installation tab above for more information.
Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.
- 1. Floating Floor
- 2. Gluing
- 3. Nailing
In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.
With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't recommended for most click-fit boards. The exception to the rule is if you're installing your click-fit floor over underfloor heating. In this case, adhesive can help keep the floor stable with fluctuating temperatures and can reduce creaky floorboards.
With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.
Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.
Download the installation and warranty guides on this tab.