Elgin Magnolia Oak
|Finish||Oiled, Invisible Oiled|
|Pack Size||2.64 m²|
|Pack Weight||36.404 kgs|
|Joining Method||Tongue & Groove|
|Installation Method||Floating, Nailed or Glued Down|
|Plank Style||Straight Plank|
Does your home need a refresh? The Elgin Magnolia Oak won’t let you down with its simple and modern look. This floor will transform your space into a calm and soothing atmosphere. Subtle tones of cream run through the rustic grains and knots to make your home light, fresh and airy. What's not to love?
As well as being effortlessly stylish, the Magnolia Oak is durable, water-resistant and scratch-resistant. Perfect for kitchens, living rooms and dining rooms. As well as protecting your floor, the invisible oil finish keeps the oak looking natural.
Each board has a tongue & groove joining method. You can either float, nail or glue this floor but if you’re unsure of the fitting process, take a look at our easy-to-read installation guides. The Magnolia Oak is like no other, the thick boards and wear layer mean that you can enjoy this floor for decades to come while the wide boards add some rustic charm. Did we mention that the magnolia oak is suitable for underfloor heating? Perfect for those who love to get cosy.
Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.
- 1. Floating Floor
- 2. Gluing
- 3. Nailing
In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.
With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.
With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.
Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.