Hutton Mansion Oak

Rating:
97% of 100
Special Price £84.52 was £185.30
Pack Price:

You require (m²)

All our samples are dispatched 1st class!

Room Suitability

  • Kitchen
  • Lounge
  • Dining
  • Bedroom
Product Code EO2015
Species Oak
Finish Lacquered
Surface Brushed
Wear Layer 5mm
Width 150mm
Thickness 18mm
Length 300-1200mm
Grade Rustic
Pack Size 1.8 m²
Pack Weight 15kg
Brand Hutton
Construction Multi Ply
Joining Method Tongue & Groove
Underfloor Heating Suitable
Product Origin Europe
Installation Method Floating, Nailed or Glued Down
Guarantee 25 Years
Plank Style Straight Plank

Hutton Mansion Oak 150 x 18/5mm has a total thickness of 18mm with a 5mm Wear Layer. This product comes in random lengths between 300-1200mm and is lightly brushed and finished with a UV lacquer which gives the plank more texture and a stunning finish.

Each plank has a 4V Groove, bevelled edge giving each plank more definition individually. This floor can be sanded down up to 6 times however it shouldn't be necessary to do so for the first 15-20 years. The grade of this product is rustic, the most popular in the industry, and means the planks have more knots and imperfections giving the floor much more character and warmth.

Engineered wood, unlike solid wood, is able to tolerate fluctuations in temperatures, meaning that it is compatible with under floor heating, something that is increasingly popular in the modern home. This ability to withstand temperature changes means that this floor will be able to be used in nearly every room in your house, including conservatories and basements. Engineered wood flooring is made from layers of plywood stuck together and finished with a layer of lamella on top. Because of this, this product is also water resistant, so is easily maintained and cleaned.

The Hutton Mansion Oak can be installed using one of three techniques. Option one, ‘floating floor’, is achieved by gluing the tongue and groove parts of the board and allow the floor as a whole to float, usually cushioned with use of an underlay. Option two would be to secret nail the tongue part of the plank into a wooden subfloor. Finally, option three would be to stick the timber directly onto the subfloor with use of flooring adhesive. Please see the full, downloadable installation guide in the installation tab above for more information.

Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.

  1. 1. Floating Floor
  2. In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.

  3. 2. Gluing
  4. With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.

  5. 3. Nailing
  6. With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.

Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.