Laminate Ramp Profile - To Match Oak Flooring
|Accessories For||Laminate Flooring|
|Accessories Type||Door Profiles|
|Length||0.9m or 2.4m|
|Thickness of Flooring||N/A|
Ramp profile for laminate flooring to match any laminate flooring colour. These profiles are used to connect two floors of different heights.
This product is 12mm high, 45mm wide, and comes in lengths of either 0.9m or 2.4m. To match it to your flooring, simply tell us at the checkout exactly what you need and which flooring you wish to match it to. If you are unsure of how much you will need to order, or want to know more about available shades, please call our friendly team on 0333 577 0025.
Solid and Engineered Wood Flooring Installation:
1) A “floating floor” is an extremely popular fitting method, this is where you run a PVA wood glue along the groove and slide the tongue back into the groove creating a strong bond. This method then allows the floor to naturally breathe as it is not fixed to one position. Underlays are often used when this installation method is used.
2) Fixing the flooring directly to the sub floor is equally as popular as a “floating floor”. You can either stick the flooring directly to the sub floor with an adhesive or secret nail the flooring to a wooden sub floor. This is the preferred method when installing solid wood flooring.
Laminate Flooring Installation:
Laminate flooring is one of the easier installation methods as it comes with click joining system. This means two planks simply just click together. Most people opt to use an underlay when installing laminate flooring.
Here are a few important tips:
- Don’t forget to leave a 10mm expansion gap.
- Allow 48 hours for an engineered floor to acclimatise
- Allow 7 days for a solid wood floor to acclimatise.
- Allow 24 hours for a laminate floor to acclimatise.
- Try and install on a level sub floor
- If you require a more detailed installation guide, please download the installation guide to the right.