Painswick Burnt Oak Click

Rating:
98% of 100
Special Price £91.72 was £181.72
Pack Price:

You require (m²)

All our samples are dispatched 1st class!

Room Suitability

  • Kitchen
  • Lounge
  • Dining
  • Bedroom
Product Code HE1193
Species Oak
Finish Oiled, Smoked
Surface Brushed
Wear Layer 3mm
Width 150mm
Thickness 14mm
Length 600mm
Grade Rustic
Pack Size 1.8 m²
Pack Weight 12.5kg
Brand Painswick
Construction Multi Ply
Joining Method Click
Underfloor Heating Suitable
Product Origin Europe
Installation Method Floating Floor - Click System
Guarantee 25 Years
Plank Style Herringbone/Parquet

Painswick Burnt Oak is one of our smoked woods, giving it a really unique dark and smoky colour. The surface is lightly brushed and finished with oil which gives the plank more texture and character while remaining extremely hard wearing. The herringbone pattern is a trend that isn't going anywhere as it adds instant interest and a modern look to your home.

Each plank has a bevelled edge which gives every individual plank a sense of definition. The planks have a total thickness of 14mm with a 3mm solid wood wear layer so you'll be able to sand and refinish this floor over the years. The rustic grade means the planks have more knots and imperfections, giving the product much more character and warmth.

The way engineered floor is made makes it extremely hard wearing. Because of this, the product works perfectly in area where day to day wear and tear is common. It's also suitable for use with underfloor heating, so your feet can stay warm and cosy in winter. Engineered wood flooring can withstand differences in temperatures and can be used in rooms where you couldn't fit solid wood, such as conservatories and basements.

Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.

  1. 1. Floating Floor
  2. In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.

  3. 2. Gluing
  4. With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.

  5. 3. Nailing
  6. With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.

Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.