Painswick Champagne Oak Click
|Pack Size||1.8 m²|
|Installation Method||Floating Floor - Click System|
|The Painswick Champagne Oak has a total thickness of 14mm with a 3mm hardtop wear layer. This product comes in fixed lengths of 600mm and is elegantly pre finished with seven coats of natural UV lacquer giving it ultimate protection, durability and easy to maintain.
Each plank has a 4V Groove, bevelled edge giving each plank more definition individually. This floor can be sanded down up to 4 times however it shouldn't be necessary to do so for the first 15-20 years. The grade of this product is rustic meaning the planks have more knots and imperfections giving the product much more character and warmth. Additionally, the herringbone floor is on trend this year and will help to immediately modernise your home and keep it in style.
Engineered flooring doesn't just look amazing, it is also extremely practical too. Thanks to the way it is constructed, engineered flooring is great to use in kitchens and rooms with higher traffic, where spillages and or exposure to water is fairly common. However as this is a natural product we would always advise you to mop up any spillages or splashes as quickly as possible. Engineered flooring is also able to withstand fluctuations in temperatures which means its compatible with underfloor heating, something that is increasingly popular in modern homes. This ability to endure temperature changes also means that this product can be laid in rooms such as conservatories or basements, where other flooring could damage itself.
The Champagne Oak can be installed by using a floating technique. The boards will simply click together at the joint and sit flush without the need of using any glue or adhesive. Please see the full, downloadable installation guide in the installation tab above for more information.
Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.
- 1. Floating Floor
- 2. Gluing
- 3. Nailing
In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.
With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.
With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.
Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.