Painswick Delicate Engineered Oak

80% of 100
Special Price £39.49 was £75.78
Pack Price:

You require (m²)

All our samples are dispatched 1st class!

Room Suitability

  • Kitchen
  • Lounge
  • Dining
  • Bedroom
Product Code HE3011
Species Oak
Finish Unfinished
Surface Smooth
Wear Layer 4mm
Width 90mm
Thickness 18mm
Length 400mm
Grade Prime
Pack Size 0.648 m²
Pack Weight 20kg
Brand Painswick
Construction Multi Ply
Joining Method Tongue & Groove
Underfloor Heating Suitable
Product Origin Europe
Installation Method Nailed or Glued Down
Guarantee 25 Years
Plank Style Herringbone/Parquet

The Painswick Delicate Oak is an excellent addition to our engineered wood range. In a stunning herringbone parquet style, this is a great choice for any home. This floor is stunning in a living room or entrance as well as being great in dining rooms and kitchens as it’s compatible with underfloor heating as with all our engineered wood flooring.

The Delicate Oak comes unfinished so will need treating at home to keep the wood protected. This is perfect for people who have a particular style or colour in mind as you’ll be able to finish this in whatever oil, lacquer, or stain you like, fully personalising your floor and making it your own. Or you might prefer to finish it in an invisible oil to keep that natural look.

Each plank is 400mm long with a width of 90mm and a thickness of 18mm. This includes the 4mm wear layer, allowing you to sand and refinish your floor multiple times. The prime grade of the product ensures a clean, sophisticated look with few knots and very little colour variation.

With a tongue and groove joining method this floor can be installed through gluing to the subfloor, or nailing down. See our detailed installation guide for more information.

Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.

  1. 1. Floating Floor
  2. In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.

  3. 2. Gluing
  4. With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't recommended for most click-fit boards. The exception to the rule is if you're installing your click-fit floor over underfloor heating. In this case, adhesive can help keep the floor stable with fluctuating temperatures and can reduce creaky floorboards.

  5. 3. Nailing
  6. With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.

Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.

Download the installation and warranty guides on this tab.