Painswick Fired Oak Click

Rating:
97% of 100
Special Price £79.12 was £178.12
Pack Price:

You require (m²)

All our samples are dispatched 1st class!

Room Suitability

  • Kitchen
  • Lounge
  • Dining
  • Bedroom
Product Code HE3014
Species Oak
Finish Lacquered
Surface Smooth
Wear Layer 3mm
Width 150mm
Thickness 14mm
Length 600mm
Grade Rustic
Pack Size 1.8 m²
Pack Weight 12.5kg
Brand Painswick
Construction Multi Ply
Joining Method Click
Underfloor Heating Suitable
Product Origin Europe
Installation Method Floating Floor - Click System
Guarantee 25 Years
Plank Style Herringbone/Parquet

Painswick Fired Oak is a beautiful rich golden colour that feels warm, lavish and cosy. The rustic grade gives some colour variation and details to the grain that look stunning in the herringbone pattern of this parquet design. The Fired Oak is elegantly finished with a lacquered layer giving it some added protection, durability and making it easy to maintain.

Engineered flooring is perfect for use with underfloor heating as it can handle the changes in heat. Because of this it's also great in rooms such as conservatories and basements where a solid wood floor might not do so well. Another key quality of engineered wood floor is its water-resistant abilities, making it easy to clean and maintain and it's scratch and stain-resistant.

Each plank has a bevelled edge giving each plank some definition around the edges. This floor has a total thickness of 14mm with a 3mm solid wood wear layer which can be sanded down and refinished as needed.

The click-joining boards makes the Painswick Fired Oak that bit easier to install. We recommend floating the floor for the simplest method.

Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.

  1. 1. Floating Floor
  2. In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.

  3. 2. Gluing
  4. With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.

  5. 3. Nailing
  6. With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.

Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.