Painswick Ivory Oak
This is one of our most popular products and as a result there is a longer delivery time. For more information please contact our sales team on 0333 577 0025 and they can advise you on waiting times.
|Pack Size||2.058 m²|
|Joining Method||Tongue & Groove|
|Installation Method||Nailed or Glued Down|
Give your home a light and breezy makeover with the Painswick Ivory Oak. This gorgeous herringbone floor will transform your home into the calming sanctuary you’ve always dreamed of. Soft hues of grey run through this floor by adding charm and charisma to your home. We can’t think of anything better!
The narrow planks in the Ivory Oak will make your space feel bigger, perfect for adding depth to your chosen room. The Ivory Oak is one of a kind. The white tones will brighten up any room of your home, while the herringbone pattern will give your space the ultra-modern look.
The Ivory Oak is brushed and oiled to perfection. The oiled finish not only keeps the natural look of the oak but also makes it resistant to stains and spills. If you have kids and pets, the brushed surface will help hide any scratches and dents. Each plank is crafted with an A&B, tongue & groove joining method, so you need to separate the planks into two different piles for left-handed and right-handed joining boards. Lay this floor over underfloor heating for a warm and cosy space.
Engineered wood is the best alternative to solid wood. Make sure you order your free sample today!
Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.
- 1. Floating Floor
- 2. Gluing
- 3. Nailing
In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.
With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.
With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.
Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.