Painswick Rabbit Grand Oak
|Pack Size||1.8 m²|
|Joining Method||Tongue & Groove|
|Installation Method||Nailed or Glued Down|
Take your home interior to the next level with our Painswick Rabbit Grand Oak. This incredible product boasts the same beautiful features as our popular Painswick Rabbit Oak but with larger planks.
Herringbone flooring has grown in popularity over the years due to its authentic and timeless appeal. Commonly associated with grand and prestigious homes, the herringbone floor design is now seen in more modern and contemporary environments, meaning your interior options are limitless.
The larger plank style is the perfect way to show off the natural beauty of the wood in its best form. The rustic grade of this wood means the knots and imperfections of the floor are showcased beautifully, giving the floor more character. Finished with a pearl satin UV lacquer, each plank hosts great texture and charm.
This floor is a part of our Engineered wood collection meaning it is incredibly resistant and can withstand everyday spillages and general wear and tear. However, as this is a natural product, we do recommend that any spillages are cleaned up straight away. Another benefit of getting engineered wood flooring is it can withstand fluctuating temperatures meaning underfloor heating is a possibility.
This flooring can be installed in two different ways - nailed or glued down. Please see the full, downloadable installation guide in the installation tab above for more information
Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.
- 1. Floating Floor
- 2. Gluing
- 3. Nailing
In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.
With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.
With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.
Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.