Painswick Sienna Oak

Rating:
97% of 100
Special Price £61.54 was £138.82
Pack Price:

You require (m²)

All our samples are dispatched 1st class!

Room Suitability

  • Kitchen
  • Lounge
  • Dining
  • Bedroom
Product Code HE2217
Species Oak
Finish Oiled
Surface Brushed
Wear Layer 6mm
Width 80mm
Thickness 20mm
Length 350mm
Grade Rustic
Pack Size 1.12 m²
Brand Painswick
Construction Multi Ply
Joining Method Tongue & Groove
Underfloor Heating Suitable
Product Origin Europe
Installation Method Nailed or Glued Down
Guarantee 25 Years
Plank Style Herringbone/Parquet

The Painswick Sienna Oak is a beautiful addition to our engineered wood range. In a stunning golden hue, this floor will be a great focal point in any home, especially in a living room. It would also make a wonderful choice for a dining room or kitchen, as engineered wood is not only sturdy but more resistant to spills and stains and able to withstand changes in temperature like underfloor heating.

An oiled finish gives a luscious appearance and ensures your engineered wood retains all the strength and durability of solid hardwood. The brushed texture of this flooring makes it ideal for busy family homes as it will hide any scratches your floor may incur over its long lifetime. If after a few years you decide to refinish your floors to return it to sparkling condition you’ll only have to sand and reoil it, making it incredibly low maintenance. The 6mm wear layer means you’ll be able to do this around 5 times, meaning the floor will last decades.

The Painswick Sienna floor comes in a length of 350mm and width of 80mm meaning the long, narrow boards will give the illusion of a bigger size in any room, accentuated by its light and rich hues. The subtle grandeur of the large herringbone design is sure to impress. In a rustic ABC grade, the knots and natural colour variation is highlighted beautifully.

This flooring comes with a tongue and groove fitting method meaning it is able to be installed through gluing or nailing methods. See our detailed installation guides for more information.

Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.

  1. 1. Floating Floor
  2. In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.

  3. 2. Gluing
  4. With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.

  5. 3. Nailing
  6. With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.

Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.