Studley Immaculate Oak

100% of 100
Special Price £167.35 was £372.41
Pack Price:

You require (m²)

All our samples are dispatched 1st class!

Room Suitability

  • Kitchen
  • Lounge
  • Dining
  • Bedroom
Product Code EO7461
Species Oak
Finish Lacquered
Surface Smooth
Wear Layer 3mm
Width 190mm
Thickness 14mm
Length 1900mm
Grade Prime
Pack Size 2.888 m²
Pack Weight 18kg
Brand Studley
Construction 3 Ply
Joining Method Tongue & Groove
Underfloor Heating Suitable
Product Origin Europe
Installation Method Floating, Nailed or Glued Down
Guarantee 25 Years
Plank Style Straight Plank

Our Studley Immaculate Oak 190 x 14/3mm Wood Flooring has a total thickness of 14mm with a 3mm solid hardtop wear layer. This product comes in fixed lengths of 1900mm, which is in line with industry standards; our fixed length products have starter boards to help reduce waste.

This product has a lacquered finish which is what gives the plank such a smooth, shiny surface. In addition to its shimmering appearance, the flooring is really easy to clean and maintain which makes it ideal for busy homes and areas with high foot traffic.

Each plank has a 4V Groove, bevelled edge giving each plank more definition individually. This floor can be sanded down up to 3 times however we would not deem this necessary to do for the first 15-20 years

The grade of this product is prime, which is the highest grade when it comes to wood flooring. Due to the way that the wood is cut it is uniform in its appearance and there are little/no knots of imperfections, so if it's a clean board that you're looking for then this is the product for you.

We offer free samples on all of our products, so if you like what you see but aren't 100% then why not order a sample to really get a feel for the floor and see how it would fit within your home.

Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.

  1. 1. Floating Floor
  2. In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.

  3. 2. Gluing
  4. With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.

  5. 3. Nailing
  6. With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.

Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.