Unfinished Solid Oak Skirting Board 120 x 20mm
|Accessories For||Engineered Wood, Solid Wood|
|Accessories Type||Skirting Boards|
|Thickness of Flooring||N/A|
Unfinished Solid Oak Skirting Board is 120mm high, 20mm wide and 2.4m long. It comes in pencil round and torus shapes - this skirting board is reversible giving the best of both worlds. The shapes will add character to any room and give you the opportunity to change other décor without the skirting board looking out of place or require replacing.
It will suit engineered or solid wood flooring, and is made of solid oak. The unfinished nature of the product means you'll be able to finish to match your flooring perfectly.
To match it to your flooring, simply tell us at the checkout exactly what you need and which flooring you wish to match it to. If you are unsure of how much you will need to order, or want to know more about available shades, please call our friendly team on 0333 577 0025.
Solid and Engineered Wood Flooring Installation:
1) A “floating floor” is an extremely popular fitting method, this is where you run a PVA wood glue along the groove and slide the tongue back into the groove creating a strong bond. This method then allows the floor to naturally breathe as it is not fixed to one position. Underlays are often used when this installation method is used.
2) Fixing the flooring directly to the sub floor is equally as popular as a “floating floor”. You can either stick the flooring directly to the sub floor with an adhesive or secret nail the flooring to a wooden sub floor. This is the preferred method when installing solid wood flooring.
Laminate Flooring Installation:
Laminate flooring is one of the easier installation methods as it comes with click joining system. This means two planks simply just click together. Most people opt to use an underlay when installing laminate flooring.
Here are a few important tips:
- Don’t forget to leave a 10mm expansion gap.
- Allow 48 hours for an engineered floor to acclimatise
- Allow 7 days for a solid wood floor to acclimatise.
- Allow 24 hours for a laminate floor to acclimatise.
- Try and install on a level sub floor
- If you require a more detailed installation guide, please download the installation guide to the right.