Oiled Solid Oak Bullnose Stair Nosing - SW5

From £23.99

Room Suitability

  • Kitchen
  • Bathroom
  • Lounge
  • Dining
  • Bedroom
Product Code NOS201
Accessories For Engineered Wood, Solid Wood
Accessories Type Stair Nosing
Construction Solid Oak
Length 0.9m or 2.4m
Width 62mm
Height 20mm
Thickness of Flooring 18mm - 20mm
Species Oak

Oiled Solid Oak Bullnose Stair Nosing is perfect for adding the finishing touches to your flooring and stairs. This is a universal stair nosing that is compatible with all our solid and engineered wood flooring products. This product is 62mm wide, 20mm high, and comes in lengths of either 0.9m or 2.4m.

Finish the overall look of your floor with our Luxury Accessories. Solid or engineered, our accessories cater to your flooring finish. They may not be the exact match in terms of colour, but they will match the oiled finish and will look stunning against your chosen floor.

Our stair nosing fits best with 18-20mm solid and engineered wood floors because of the standard height of our stair nosing. Any boards that are thinner than 18mm will need extra joinery work so everything fits correctly. If you're unsure, our friendly bunch of flooring experts are here to help.

Solid and Engineered Wood Flooring Installation:

1) A “floating floor” is an extremely popular fitting method, this is where you run a PVA wood glue along the groove and slide the tongue back into the groove creating a strong bond. This method then allows the floor to naturally breathe as it is not fixed to one position. Underlays are often used when this installation method is used.

2) Fixing the flooring directly to the sub floor is equally as popular as a “floating floor”. You can either stick the flooring directly to the sub floor with an adhesive or secret nail the flooring to a wooden sub floor. This is the preferred method when installing solid wood flooring.

Laminate Flooring Installation:

Laminate flooring is one of the easier installation methods as it comes with click joining system. This means two planks simply just click together. Most people opt to use an underlay when installing laminate flooring.

Here are a few important tips:

  • Don’t forget to leave a 10mm expansion gap.
  • Allow 48 hours for an engineered floor to acclimatise
  • Allow 7 days for a solid wood floor to acclimatise.
  • Allow 24 hours for a laminate floor to acclimatise.
  • Try and install on a level sub floor
  • If you require a more detailed installation guide, please download the installation guide to the right.