Studley Iris Oak
|Pack Size||1.44 m²|
|Joining Method||Tongue & Groove|
|Installation Method||Floating, Nailed or Glued Down|
|Plank Style||Straight Plank|
Effortless style and heaps of character. Introducing the Studley Iris Oak. Fall in love with tones of honey and shades of beige. This floor is certain to transform your home into a space you've always dreamed of.
If you like an authentic look, you will love the Iris Oak, all thanks to the natural lacquer. It keeps all the wood's character and original colour while protecting it against scratches, stains and spillages. The brushed surface enhances the beauty of the wood, adding a rustic flair to the unique knots and grains.
Worried about your pets or kids scratching your floor? Not to worry, small scuffs and scratches are easier to hide with a brushed surface!
Every plank of the Iris Oak comes in different lengths between 300-1200mm. So you have endless opportunities to make your own special place.
Looking for a strong floor? Thanks to the construction of engineered wood, you’re promised decades of durability. Each board is backed with sturdy layers of timber and topped with a layer of solid wood. Engineered wood can be fitted with underfloor heating too. Ideal if you’re looking for kitchen or living room flooring.
Order your free sample and start your home makeover today!
Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.
- 1. Floating Floor
- 2. Gluing
- 3. Nailing
In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.
With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't recommended for most click-fit boards. The exception to the rule is if you're installing your click-fit floor over underfloor heating. In this case, adhesive can help keep the floor stable with fluctuating temperatures and can reduce creaky floorboards.
With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.
Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.
Download the installation and warranty guides on this tab.