Painswick Amber Oak Click
|Pack Size||1.8 m²|
|Installation Method||Floating Floor - Click System|
Painswick Amber Oak Click 150 x 600 x 14/3mm Herringbone Engineered Oak Wood Flooring has a total thickness of 14mm with a 3mm hardtop wear layer and comes in fixed lengths of 600mm. This product is lightly brushed and finished with a UV Oil which gives the plank more texture and a stunning aesthetic.
Each plank has a 4V Groove, bevelled edge giving each plank more definition individually. This floor can be sanded down which means the planks have more knots and imperfections giving the product much more character and warmth. Additionally, the herringbone floor is on trend this year and will help to immediately modernise your home and keep it in style.
Engineered wood floor is incredibly resistant and can therefore withstand splashes, spillages and every day wear and tear. However as this is a natural product we would always advise you to mop up any spillages or splashes as quickly as possible. Engineered flooring is also able to withstand fluctuations in temperatures which means its compatible with underfloor heating, something that is increasingly popular in modern homes. This ability to endure temperature changes also means that this product can be laid in rooms such as conservatories or basements, where other flooring could damage itself.
One of the best things about the Painswick Amber Oak Click is that it features a click-joining system to make it easy to install. The boards will fit together with a simple click and don’t need to be attached to the subfloor itself. This is called the floating floor method. Take a look at our installation guide for more information.
Our Engineered Flooring can be installed in three different ways, so it depends on your joining method, the subfloor and what sort of method you prefer.
- 1. Floating Floor
- 2. Gluing
- 3. Nailing
In a floating floor, the boards are joined to each other, instead of to the subfloor. If you have a click-joining floor, floating is the way to go. If not, you could still use this method by gluing the tongue and the groove joint together. Either way, we'd advise you to have underlay installed and prepped. We wouldn't recommend this method for tongue & groove parquet as it won't be as sturdy.
With this method, adhesive is applied to the top of the subfloor with a trowel and then the individual planks are laid on top. This is our favoured method for tongue & groove parquet flooring but isn't suitable for any type of click-fit boards.
With this method, secret nails go through the tongue to secure the planks to a wooden subfloor. Because of this, nailing is only suitable for tongue & groove floors, not click-fit. Professional fitters tend to prefer this method as the result is extremely secure. You'll need to fit a wood layer above any concrete because secret nailing cannot be done directly on top of a concrete subfloor.
Check out our full guide for step-by-step instructions on how to fit engineered wood flooring.